| Wave Forms |
Sine, Square, Triangle & TTL output. |
| Frequency Range |
1Hz to 1MHz for all functions in 6 decade steps with calibrated linear variation |
| |
in between steps. |
| Frequency Counter |
4 digit display for output Frequency. |
| Accuracy |
With in ± 2% in first 5 ranges & ± 4%.last range. |
| Output Amplitude |
0 – 15Vpp into 50 ohms and 30 Vpp in Open Circuit. |
| DC Off Set |
Continuously Variable ±10V into open circuit. Combined signal plus |
| |
offset is limited to 20 Vpp. |
| Output Impedance |
600 ohms (±5%) Option : 50W. |
| Attenuation |
0 to 20db. |
| Output Coupling |
DC. |
| Sine Wave Distortion |
Less than 1% from 10Hz to 100KHz Harmonics more than 30 db down from fundamental for 100KHz to 1MHz. |
| |
|
| Amplitude Flatness |
Sine, Square, Triangle-Ref 10KHz within ±0.5 db from 10Hz to 10KHz |
| |
Sine, Triangle and square wave amplitude match within 1 db @10KHz. |
| Square Wave |
Rise time - < 100 ns. ; Fall time - < 100 ns. |
| Duty Cycle |
49% to 51%. |
| Symmetry |
NA. |
| Triangle |
< 1%. |
| Aberrations |
Within ± 5% of Vpp of the waveform. |
| Triangle Wav Linearity |
0.5%. |
| VCO Input |
Facilities remote programming of frequency / Frequency modulation to sweep |
| |
frequency around dial setting, |
| - Characteristics |
Sweep frequency ratio : 100:1 |
| |
Input Impendence : 1Kohms |
| |
Input level : Min 20mV, Max : ±5V. |
| TTL Square Wave |
Rise Time -< 50 ns ; Fall Time - < 50 ns ; Amplitude – 5 Vpp (± 3%). |
| Power |
230V ±10%, 50Hz, AC, Single Phase |
